Jump to content

This is asiafortress


Ready to LAN?

  • asiafortress cup 14
  • Sign in to follow this  

    Setting Up and Customisation


    Part 1: Introduction So you’ve been playing TF2 for years and still haven’t figured out how they do those amazing shots.




    You’ve come to the conclusion that you can’t aim as well as these monster players or pull off amazing middies as them. Well unless you are playing with a touch-pad or a trackball, you are most likely wrong!


    This guide was written to help old-timers and new-comers alike. Having TF2 set up correctly is crucial as it affects your abilities to interact with the game.


    What you want from your settings:

    - consistency

    - comfort


    Why do you want consistency?

    Consistency is important as it allows you to have a predictable environment on which to build muscle memory (for aim). Having that muscle memory for aiming means it becomes a reflex. Being able to reproduce those same movements without having to concentrate on it will allow you to focus on other things like teamwork and gamesense.


    You want a comfortable interface to interact with. Finding a HUD that you are comfortable with is as important. You don’t want distractions to ruin your game.


    Part 2: Game Settings Graphics Settings: Frames per second(fps) matter in FPS games. It can decide whether you hit a shot and feel like a boss or miss a shot and slam your mouse on the table. In general, you want decent and consistent frames per second.


    What is good:

    - minimal to no fluctuations in fps

    - fps script

    - mat_queue_mode 2

    - able to sustain more than 120fps consistently


    What is bad:

    - fluctuations in fps

    - v-sync ( it adds input delay )

    - anti-aliasing

    - everything set to high

    - 60 hertz monitors (fps games don’t use motion blurring, 75hz is the least you should settle for)


    FPS Scripts: Fps scripts are pre-written configurations that attempt to squeeze every last drop of fps out of TF2. All the bling-bling graphical gloss and effects are removed all in the pursuit of a higher fps count and a cleaner graphical experience. One fine example is the uk.pngChris fps script: Download it from here. Here you will find a few variations of Chris fps script.


    MAXFRAMES - Use this if you really need the maximum amount of frames


    HIGHFRAMES - Very good balance of frames per second and graphical detail. Recommended for most


    DX9FRAMES - For those who can’t live without direct-x 9 effects Ignore the high/max quality configs unless you want to troll yourself.


    Resolution, aspect ratios and field of view: In game aspect ratio is determined by your in game resolution. Higher fov will increase your awareness and feel of speed.





    TF2 defaults to a 4:3 aspect ratio which limits your effective field of view (FOV). FOV setting fov_desired defaults to 75 in game. FOV in conjunction with aspect ratio determines your effective fov which is how much peripheral vision you have in game. Therefore, with cvar fov_desired set to 90 (max):




    FOV is tied down to aspect ratio and not resolution directly. 1360 x 768 and 1920 x 1080 are both 16:9 resolutions and will net you the same effective fov. The higher resolution only gives u a bigger drawn picture. There are players who use very high aspect ratios like 2.39:1 to achieve very high effective fov. There is a optimal range though. Too high a fov may worsen your perception of depth.


    Full screen or Windowed?

    TF2 runs at full screen by default. There are people who prefer to run the game in windowed mode as you can alt-tab faster. You can make windowed mode look like full screen by setting the resolution to your desktop resolution and running with no borders. If you decide to use full-screen, be wary of alternate tabbing, especially with some settings which will cause you to alt-tab back to a black screen.


    To run in windowed mode:

    - Right click on steam icon in task bar

    - Select Library from the menu

    - On the games list, right click on TF2 and select Properties

    - In the General tab click on “Set Launch Options”

    - Here you can set a lot of things for TF2:

    “-sw” means start windowed, “-noborder” will remove the window border, “-w 1440 -h 900″ will set the resolution to 1440 by 900, w for width h for height


    Full screen vs windowed


    Full screen

    + Smoother feeling overall

    + Less fps fluctuations

    - Alternate-tabbing is slow

    - Alternate-tabbing can crash TF2 if you use fps config (you’ll get black screen)



    + Alternate-tabbing is instant (like a boss)

    + You can still make it look like its full screen

    - Puts more strain on CPU/Graphics resources

    - Will not feel as smooth as full screen (depending on computer)


    Keyboard Settings: tf2 competitive config provides a very comprehensive keyboard mapping with toggles for essential things such as high/low interp, view models etc.

    keyboard-r2.jpg TF2 Competitive Config Keyboard Mappings



    Competitive Config Keyboard Mappings

    Download it here.


    HUDs The HUD is the way the game communicates with you, relaying you essential information like your health, your teammates health, capture status, uber charge status. It is essential that the right information is delivered to you efficiently and with minimal distraction.





    The default HUD for TF2 is very basic and clumbsy and was not designed with competitive play in mind. Having your health and ammo displayed at opposite ends at the bottom corners of the screen means you will have to turn your attention to those area of the screen if you want to know your health/ammo, an unnecessary distraction.



    This is PVHUD, a custom HUD made by au.png povohat and now currently maintained by Barrakketh. Downloadable from here. PVHUD makes everything simple and changes those obstructive boxes. Of course that is just an example of what custom HUD’s can bring. There are heaps of other custom HUD’s :




    packaged in an archive container, usually in the form of a .zip, .rar or .7z file. You will need an archiver utility to extract them. I recommend 7zip.


    Head into your Steam directory (Program Files/ Steam/ steamapps/ [your username/ team fortress 2/ tf2). In the tf2 folder you’ll find a small group of folders, two of which will be called ‘resource’ and ‘scripts’. Open the downloaded HUD file using 7zip or whichever utility you have. Inside you’ll find ‘resource’ and ‘script’ folders. Installing the new HUD is as simple as replacing the “resource” and “scripts” folders in your “tf2″ folder.


    Part 3: Mouse Settings


    Your mouse is a key directional input tool.

    I will not go into choice of mouse here. The things that matter when choosing a mouse are comfort and sensor quality. Some things you need to be aware of with certain mice are negative acceleration, correction, prediction.


    Mouse Settings

    m_rawinput 1 – Enables the mouse input to bypass windows settings. Team Fortress 2 can be subject to operating system influences on mouse control. While this can be mitigated through launch options and registry edits, the easiest method to override this is by enabling Raw input (m_rawinput 1).




    Tracking and Flicking


    Tracking aim – Tracking is your ability to place your cross-hair over your opponent. This allows you to minimize re-adjustment before shooting. Typically used for hit-scan weapons like shotgun and scatter-gun. Predicting player movements will help in tracking.


    Flick/Twitch aim – Are short quick swipes and is used to rapidly place(snap) your crosshair on a pre-determined location. This requires muscle memory and is easier with mouse acceleration turned off for consitency.

    Improving: Finding a balance, using both techniques in appropriate times. Tracking then twitching (for a quick adjustment) before firing would be a good place to start. Start by taking your time and be sure to land your shots. As you get more comfortable, you’ll be able to track and flick faster and more consistently. Everyone will find their own balance, the two linked articles below will hopefully help you in finding your preference.

    That’s all for now.

    Here are some select articles I found for further reading.


    Good luck with your progress!


    A copy of my current config is available here.


    Further reading:

    vsync: http://hardforum.com...ad.php?t=928593

    input lag: http://www.overclock...-input-lag.html

    tracking/twitching: http://www.gotfrag.c.../thread/403388/ http://forums.steamp...d.php?t=1929611

    mouse settings: http://wiki.commforu...use_sensitivity

    tf2 mechanics: http://wiki.teamfort.../wiki/Mechanics

      Report Article
    Sign in to follow this  

    User Feedback

    Recommended Comments

    Really useful. I actually didn't use any kind of competitive CFG though (Since I'm already used to a lot of things with the default settings since my pub days), but I'm fine with just a few Medic binds. Seems tweaking the interp sometimes made my internet laggy, so I decided not to touch it. Overall, I'm all set up.


    I really recommend that HUD change though as the misplacements distracted me. I'm using Garm3nhud.

    Share this comment

    Link to comment
    Share on other sites

    Lollery configs don't work like that.


    Unless you have another config to exec on the fly (by binding a key), you cannot 'switch out' of configs.

    Share this comment

    Link to comment
    Share on other sites

    Please sign in to comment

    You will be able to leave a comment after signing in

    Sign In Now